Item Description

Newgear Large Precision 8 Arcmin Ratio 7:1 Motor Planetary Speed Gear Containers

Planetary gearbox is a sort of reducer with wide flexibility. The interior gear adopts lower carbon alloy steel carburizing quenching and grinding or nitriding approach. Planetary gearbox has the attributes of small construction dimension, huge output torque, substantial velocity ratio, substantial efficiency, risk-free and dependable functionality, etc. The inner equipment of the planetary gearbox can be divided into spur gear and helical equipment. Consumers can decide on the correct precision reducer according to the demands of the application.

Item Parameters

Attributes:
one.The unique flange output manufactured can obtain better set up flexibility
two.The fuselage size is shorter and the set up place requirement is reduced
three.No axis double support scenario world carrier framework,large dependable,suitable for substantial-velocity recurrent CZPT and reverse rotation
4.With axial clearance adjustment perform
five.The rotating frame bearing can be switched. Right after modifying into angular speak to bearing, the bearing potential of axial power and radial power is drastically enhanced
6.Influence resistance, can adapt to higher acceleration and deceleration conditions
seven.Helical equipment transmission,low backlash,and have capacity increased
eight.Dimensions assortment:64–110mm
nine.Ratio assortment:3-a hundred
10.Precision range:1-3arcmin(P1)3-5arcmin(P2)

Specifications PG64 PG90 PG110
Technal Parameters
Max. Torque Nm 3times rated torque
Emergency End Torque Nm 3times rated torque
Max. Radial Load N 2050 4100 8200
Max. Axial Load N 513 1571 2050
Torsional Rigidity Nm/arcmin 13 31 eighty two
Max.Input Pace rpm 6000 6000 4500-6000
Rated Input Velocity rpm 4000 3000 3000
Noise dB ≤58 ≤60 ≤65
Average Existence Time h 20000
Efficiency Of Entire Load % L1≥95%       L2≥90%
Return Backlash P1 L1 arcmin ≤3 ≤3 ≤3
L2 arcmin ≤5 ≤5 ≤5
P2 L1 arcmin ≤5 ≤5 ≤5
L2 arcmin ≤8 ≤8 ≤8
Moment Of Inertia Table L1 four Kg*cm2 .thirteen .51 two.87
five Kg*cm2 .thirteen .47 2.71
seven Kg*cm2 .13 .forty five 2.sixty two
10 Kg*cm2 .03 .44 two.fifty seven
L2 16 Kg*cm2 .03 .23 .forty seven
twenty Kg*cm2 .03 .23 .47
25 Kg*cm2 .03 .23 .47
28 Kg*cm2 .03 .23 .47
35 Kg*cm2 .03 .23 .47
forty Kg*cm2 .03 .23 .forty seven
50 Kg*cm2 .03 .2 .forty four
70 Kg*cm2 .03 .two .forty four
one hundred Kg*cm2 .03 .2 .forty four
Complex Parameter Degree Ratio   PG60 PG90 PG110
Rated Torque L1 four Nm 40 120 220
5 Nm forty 125 260
seven Nm 40 a hundred twenty five 260
ten Nm 35 80 a hundred and sixty
L2 sixteen Nm fifty 120 three hundred
20 Nm fifty a hundred and twenty three hundred
25 Nm fifty one hundred twenty five 350
28 Nm 50 one hundred twenty 300
35 Nm fifty one hundred twenty five 350
40 Nm 50 a hundred twenty five 350
50 Nm 50 one hundred twenty five 350
70 Nm 50 one hundred twenty five 350
a hundred Nm 35 eighty 220
Degree Of Defense   IP65
Operation Temprature ºC  – 10ºC to -90ºC
Weight L1 kg 1.three 3.four 7.1
L2 kg one.nine four.seven 9.5

Organization Profile

Packaging & Shipping

1. Lead time: 7-ten functioning times as normal, 20 functioning times in busy period, it will be primarily based on the thorough order quantity
two. Delivery: DHL/ UPS/ FEDEX/ EMS/ TNT

FAQ

1. who are we?
Hefa Team is primarily based in ZheJiang , China, commence from 1998,has a 3 subsidiaries in whole.The Major Merchandise is planetary gearbox,timing belt pulley, helical gear,spur equipment,gear rack,gear ring,chain wheel,hollow rotating platform,module,etc

2. how can we guarantee top quality?
Often a pre-creation sample ahead of mass manufacturing
Constantly ultimate Inspection before shipment

3. how to select the suited planetary gearbox?
Very first of all,we need you to be capable to provide appropriate parameters.If you have a motor drawing,it will permit us advocate a ideal gearbox for you more rapidly.If not,we hope you can offer the adhering to motor parameters:output velocity,output torque,voltage,existing,ip,sounds,running situations,motor size and power,and so on

4. why ought to you get from us not from other suppliers?
We are a 22 many years activities manufacturer on making the gears, specializing in production all sorts of spur/bevel/helical equipment, grinding equipment, equipment shaft, timing pulley, rack, planetary equipment reducer, timing belt and this kind of transmission equipment components

five. what companies can we supply?
Approved Shipping Conditions: Fedex,DHL,UPS
Acknowledged Payment Currency:USD,EUR,HKD,GBP,CNY
Recognized Payment Type: T/T,L/C,PayPal,Western Union
Language Spoken:English,Chinese,Japanese

 

Application: Industrial
Speed: Low Speed
Function: Driving
Casing Protection: Closed Type
Number of Poles: 2
Starting Mode: Direct on-line Starting

###

Samples:
US$ 262/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

Specifications PG64 PG90 PG110
Technal Parameters
Max. Torque Nm 3times rated torque
Emergency Stop Torque Nm 3times rated torque
Max. Radial Load N 2050 4100 8200
Max. Axial Load N 513 1025 2050
Torsional Rigidity Nm/arcmin 13 31 82
Max.Input Speed rpm 6000 6000 4500-6000
Rated Input Speed rpm 4000 3000 3000
Noise dB 58 ≤60 ≤65
Average Life Time h 20000
Efficiency Of Full Load % L195%       L290%
Return Backlash P1 L1 arcmin ≤3 ≤3 ≤3
L2 arcmin ≤5 ≤5 ≤5
P2 L1 arcmin ≤5 ≤5 ≤5
L2 arcmin ≤8 ≤8 ≤8
Moment Of Inertia Table L1 4 Kg*cm2 0.13 0.51 2.87
5 Kg*cm2 0.13 0.47 2.71
7 Kg*cm2 0.13 0.45 2.62
10 Kg*cm2 0.03 0.44 2.57
L2 16 Kg*cm2 0.03 0.23 0.47
20 Kg*cm2 0.03 0.23 0.47
25 Kg*cm2 0.03 0.23 0.47
28 Kg*cm2 0.03 0.23 0.47
35 Kg*cm2 0.03 0.23 0.47
40 Kg*cm2 0.03 0.23 0.47
50 Kg*cm2 0.03 0.2 0.44
70 Kg*cm2 0.03 0.2 0.44
100 Kg*cm2 0.03 0.2 0.44
Technical Parameter Level Ratio   PG60 PG90 PG110
Rated Torque L1 4 Nm 40 120 220
5 Nm 40 125 260
7 Nm 40 125 260
10 Nm 35 80 160
L2 16 Nm 50 120 300
20 Nm 50 120 300
25 Nm 50 125 350
28 Nm 50 120 300
35 Nm 50 125 350
40 Nm 50 125 350
50 Nm 50 125 350
70 Nm 50 125 350
100 Nm 35 80 220
Degree Of Protection   IP65
Operation Temprature ºC  – 10ºC to -90ºC
Weight L1 kg 1.3 3.4 7.1
L2 kg 1.9 4.7 9.5
Application: Industrial
Speed: Low Speed
Function: Driving
Casing Protection: Closed Type
Number of Poles: 2
Starting Mode: Direct on-line Starting

###

Samples:
US$ 262/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

Specifications PG64 PG90 PG110
Technal Parameters
Max. Torque Nm 3times rated torque
Emergency Stop Torque Nm 3times rated torque
Max. Radial Load N 2050 4100 8200
Max. Axial Load N 513 1025 2050
Torsional Rigidity Nm/arcmin 13 31 82
Max.Input Speed rpm 6000 6000 4500-6000
Rated Input Speed rpm 4000 3000 3000
Noise dB 58 ≤60 ≤65
Average Life Time h 20000
Efficiency Of Full Load % L195%       L290%
Return Backlash P1 L1 arcmin ≤3 ≤3 ≤3
L2 arcmin ≤5 ≤5 ≤5
P2 L1 arcmin ≤5 ≤5 ≤5
L2 arcmin ≤8 ≤8 ≤8
Moment Of Inertia Table L1 4 Kg*cm2 0.13 0.51 2.87
5 Kg*cm2 0.13 0.47 2.71
7 Kg*cm2 0.13 0.45 2.62
10 Kg*cm2 0.03 0.44 2.57
L2 16 Kg*cm2 0.03 0.23 0.47
20 Kg*cm2 0.03 0.23 0.47
25 Kg*cm2 0.03 0.23 0.47
28 Kg*cm2 0.03 0.23 0.47
35 Kg*cm2 0.03 0.23 0.47
40 Kg*cm2 0.03 0.23 0.47
50 Kg*cm2 0.03 0.2 0.44
70 Kg*cm2 0.03 0.2 0.44
100 Kg*cm2 0.03 0.2 0.44
Technical Parameter Level Ratio   PG60 PG90 PG110
Rated Torque L1 4 Nm 40 120 220
5 Nm 40 125 260
7 Nm 40 125 260
10 Nm 35 80 160
L2 16 Nm 50 120 300
20 Nm 50 120 300
25 Nm 50 125 350
28 Nm 50 120 300
35 Nm 50 125 350
40 Nm 50 125 350
50 Nm 50 125 350
70 Nm 50 125 350
100 Nm 35 80 220
Degree Of Protection   IP65
Operation Temprature ºC  – 10ºC to -90ºC
Weight L1 kg 1.3 3.4 7.1
L2 kg 1.9 4.7 9.5

Worm reducer gearbox – What You Need to Know

When shopping for a Worm reducer gearbox, it is important to consider the functions and features of the unit. It is also important to take into account its cost. We will take a look at the different types of worm reducer gearboxes and the applications that they can be used for. This will help you choose the right unit for your application.
worm reducer

Features

Worm gears are popular in instruments that require fast stopping, such as elevators and lifts. Their soft materials allow them to absorb shock, which reduces the likelihood of failure. They are also beneficial in heavy-duty machines, such as rock crushers. Some manufacturers offer special worms with zero backlash and high-accuracy reduction.The worm reducer gearbox has a variety of features, including an axial pitch and a circular pitch. The axial pitch of the worm must match the circular pitch of the larger gear. Its threads are left or right-handed, and its lead angle is the distance a point on the thread travels during a revolution of the worm.The worm gear reducer gearbox is widely available, and gear manufacturers typically maintain a large inventory of them. Because worm gears are standardized, their mounting dimensions are generally uniform across manufacturers. This means that choosing one will not require you to change the height, length, or diameter of the output shaft. Worm gear reducer gearboxes also have dimensional consistency.Worm gears are very efficient. They have a high load capacity and a low friction coefficient. The worm gears also have a precise tooth profile, which reduces speed fluctuations and allows for quiet operation.

Functions

Worm gears have different functions. They can be used in a variety of applications. For instance, they can be used in elevators to reduce the load on the elevator. These gears also have low noise levels because they are made of dissimilar metals. Moreover, these gears can be used in elevators because they are suitable for this type of application. However, they need a single stage reducer gearbox to function properly.Another important feature of a worm reducer gearbox is that it can operate in reverse. This means that the input shaft turns backwards, while the output shaft rotates forwards. Examples of such applications include hand-cranked centrifuges, blacksmithing forge blowers, and the wind governor of musical boxes. Worm gears are available in different shapes and sizes, from gearsets to housed units. They can also be configured as multi-speed designs. Some manufacturers also offer special precision and zero-backlash worms.A worm reducer gearbox’s tooth form is important in determining the capacity of the device. Typically, a single-lead worm gear has the same lead on the left and right tooth surfaces, although a dual-lead worm gear has different leads on each side. This feature helps to eliminate play in the worm gear. However, it is important to note that a worm reducer gearbox can be manufactured with different tooth shapes for different applications.The worm gear is an alternative to conventional gears. It operates in a similar fashion to ordinary gear drives. The main advantage of a worm gear is that it is able to reduce the rotational speed and torque of a rotating shaft. It also has the added benefit of being able to transfer motion at an angle of 90 degrees. The only drawback of a worm gear is that it cannot reverse motion.

Applications

This market report analyzes the Worm reducer gearbox market from a global perspective. It includes a comprehensive analysis of the current market trends and future growth prospects. It also provides information about the competitive landscape and the main players in the industry. The report also highlights the key factors affecting the growth of the Worm reducer gearbox market.
The major regional markets for the Worm reducer gearbox include North America, Asia-Pacific, the Middle East and Africa, Latin America, and Europe. The market in these regions is likely to remain stable with a limited growth over the next few years. A worm gear is a small mechanical device that is connected to a larger gear. When connected together, it produces a low output speed but high torque.The gearing on a worm drive can be right-hand or left-hand, and can turn clockwise or counter-clockwise. Depending on the worm’s helix angles, back-driving and friction can be reduced. Worm gears are available in housed units or in gearsets. Some manufacturers offer integrated servomotors and multi-speed designs. High-accuracy and zero-backlash worms are available.Worm gears are particularly popular in instruments that require fast stops. They are also commonly found in elevators and lifts. Their soft nature and low-shock characteristics make them highly suitable for these types of machines.
worm reducer

Cost

Cost is an important consideration when selecting a worm reducer gearbox. The initial cost of a worm gear reducer gearbox is considerably lower than other types of gear reducer gearboxes. Worm gear reducer gearboxes are also more energy-efficient, and have higher overload capacities than competitive systems. The following are factors that affect the cost of a worm gear reducer gearbox.Stainless steel worm gear reducer gearboxes from Agknx offer great value for the money. They offer flange input and hollow output bore sizes, as well as center distances ranging from 1.75″ to 3.25″. In addition to the standard version, a stainless steel bushing kit is available, which allows users to use a wider range of head shaft sizes. Stainless steel worm gear reducer gearboxes are available in stock from all six of Agknx’s regional warehouses. They also come with free prepaid freight.Worm gear reducer gearboxes are often used in power transmission systems, elevators, conveyor belts, and medical equipment. In these applications, they are used to control the speed of a load and prevent it from freefall. While worm gear reducer gearboxes are not as efficient as helical gearboxes, they are still very useful for applications that require high torque or high output rates.To select the right type of worm for your application, you should consider the number of teeth it contains. It’s best to select worms with a combined total of 40 teeth or more.

aspect

Worm reducer gearboxes vary in size. They have one, two or more threads. Each thread has a lead angle. A high ratio has more teeth than a low gear, and a low ratio has fewer teeth. These differences are the result of gearing. The size of the worm gear reducer gearbox should be selected according to the specific application.The worm gear reducer gearbox saves space and provides more torque. Agknx Gearbox has created a variety of models to overcome common deceleration challenges, from standard to hygienic markets. The superior transmission Agknx range is designed to solve common deceleration challenges and expand to meet the needs of the sanitary industry.The diameter of the worm reducer gearbox is an important consideration. Its diameter should be equal to or slightly larger than the diameter of the grinding wheel or tool. This will affect the pressure angle. The pressure angle on a worm reducer gearbox depends on several factors, including its diameter and lead angle. The diameter of the grinding wheel or tool also has an effect on the profile of the worm.Worm gear reducer gearboxes are common. Many gear manufacturers have large stocks of these gear reducer gearboxes. Since gears are standardized, the mounting dimensions of worm gears are also common among manufacturers. This makes it easy to select a worm gear reducer gearbox for your application. In addition, the worm gear reducer gearbox is easy to install and maintain.
worm reducer

Worm gear reducer gearbox oil

Worm gear reducer gearboxes usually use gear oil. Several types of gear oils are available, including synthetic, polyalkylene glycol, and mineral oils. The oil used in the worm gear reducer gearbox must have the right viscosity for the gear. Some oils are more corrosive than others and should be avoided if the environment is toxic.The oil of the worm gear reducer gearbox must be protected against corrosion, wear and friction. It is best to choose a lubricant with low friction rate, high oxidation resistance and good anti-wear protection. While mineral oils are the most common type of lubricant, synthetic base oils can improve gear efficiency and reduce operating temperatures. This is because the Arrhenius rate rule states that the chemical reaction in the oil doubles for every 10 degrees Celsius increase in temperature.Worm gear reducer gearboxes are available in a variety of sizes and configurations. They are suitable for all kinds of machines and equipment. The sliding action between the worm gear and the output shaft produces high torque and high efficiency. If the transmission speed is low, the worm gear and output shaft can be combined for maximum efficiency.Worm gear reducer gearboxes require less frequent oil changes than other types of gear reducer gearboxes. However, regular oil should be changed every six months or 2,500 hours, whichever comes first. Also, it is a good idea to regularly monitor the oil level to prevent lubrication-related gearbox failures. It’s also wise to use synthetic oil, as it will last longer between oil changes.

China Newgear High Precision 8 Arcmin Ratio 7: 1 Motor Planetary Speed Gear Boxes     worm gearbox applicationChina Newgear High Precision 8 Arcmin Ratio 7: 1 Motor Planetary Speed Gear Boxes     worm gearbox application
editor by CX 2023-04-13

Brass Worm Gear

As one of the brass worm gear manufacturers, suppliers, and exporters of mechanical products, We offer brass worm gears and many others.

Please get in touch with us for details.

Manufacturer supplier exporter of brass worm gear.

Recent Posts